DRAFT FOR CONTENT APPROVAL · Images marked "Dummy", all videos and all testimonials are placeholders.
TechnoShield
Home Our Story Technology Products Omega ShieldAlpha ShieldCrystal ShieldColorantR&D Partners Reviews Gallery Warranty Verify a serialCheck my warrantyDealer loginGet a Quote
Home/Technology
The technology

Why we use TechnoShield TPU PPF

310%
Aerospace-grade aliphatic TPU base film · Enhanced impact resistance

Made to stretch, made to absorb

Selected from premium imported aliphatic polycaprolactone pellets and engineered with an 8-layer micro-composite structure. With an overall elongation rate exceeding 310%, it conforms perfectly to complex curves, defending against high-speed flying stones and accidental scratches.

  • 8-layer micro-composite
  • Aliphatic polycaprolactone
  • Complex-curve conformity
ΔE<2
Level 10 yellowing resistance · Long-lasting anti-ageing

No yellowing, no cracking

Subjected to over 3,000 hours of QUV accelerated UV ageing tests and infused with industrial-grade UV absorbers. It guarantees no yellowing or cracking for up to 10 years, eliminating concerns about age-related degradation.

  • 3,000+ h QUV ageing
  • Industrial-grade UV absorbers
  • Up to 10 years
>95%
60 °C heat-activated self-healing · Micro-scratch repair rate

Scratches that heal themselves

Equipped with a cutting-edge nano smart-repair coating featuring "elastic memory" molecular chains. With just 3 minutes of heating under 60 °C sunlight or warm water, fine scratches automatically reorganise and heal, keeping the film looking brand new.

  • 3 minutes at 60 °C
  • Sunlight or warm water
  • Elastic-memory chains
−40°/150°
All-weather weatherability & corrosion resistance

Withstands extreme temperatures

Boasting exceptional weatherability, it maintains physical stability across extreme temperature ranges from −40 °C to 150 °C. It is impervious to chemical corrosion from acid rain, bird droppings and tree sap, protecting long-term paint gloss.

  • Acid rain
  • Bird droppings
  • Tree sap
<15%
Optical-grade pressure-sensitive adhesive (PSA) · Peel strength degradation

Comes off clean. Paint stays perfect.

Formulated with eco-friendly active PSA and verified through 85 °C high-temperature baking tests. It ensures zero residue on removal without damaging the original factory paint, locking in the vehicle's high resale value.

  • 85 °C baking test
  • Zero residue
  • Protects resale value
Product structure

Five layers, one shield

Scroll to separate the layers, or hover one to see what it does.

  • Protection layerPeel-off film that shields the top coat during shipping and installation.
    1.5 mil
  • Top coatingNano smart-repair coat with “elastic memory” chains: self-heals at 60 °C.
    0.2 mil
  • TPU substrate layerAerospace-grade aliphatic TPU that absorbs stone chips and impacts.
    6.1 mil
  • Install adhesive layerOptical-grade PSA: strong bond, zero residue on removal.
    0.5 mil
  • Backing paperRelease liner that protects the adhesive until installation.
    3 mil
See the difference

Unprotected vs TechnoShield

Drag across the car. On the left: oxidised, swirl-marked paint. On the right: the same paint kept glossy under TechnoShield film.

Unprotected paintPaint under TechnoShieldWithout PPFTechnoShield
Drag to compare
Tested, not assumed

The standards behind every roll

R&D and manufacturing

ASTM D4833

Puncture resistance: up to ≥ 180 N vs a ≥ 120 N baseline.

ASTM D3330

Initial adhesion: up to 1218 gf vs a ≥ 500 gf baseline.

ASTM D882

Substrate tensile rate: up to 500% vs a ≥ 200% baseline.

QUV 3,000 h

Accelerated UV ageing for Level 10 yellowing resistance, ΔE < 2.

Dummy video
Self-healing demo (20s)
Brass-brush scratch, warm water, scratch disappears.
Dummy video
Stone-chip / impact test (20s)
Unprotected panel vs TechnoShield panel side by side.
Get started

Ready to shield your dream car?

Get a quote and we'll connect you with the nearest certified TechnoShield installer.

Get a quote Compare films